Mylex Disk Array controller Software Kit 2.01, Installation Manual And User'S Manual

Page: 29 / 172

NetWare
Manual No. 771929 2-9
N
E
T
W
A
R
E
2
Each device requires a driver module connecting it to the DAC adapter.
These modules are best loaded in the STARTUP.NCF file before the
MDAC.HAM driver.
The common devices and required modules are:
SCSI disk drives SCSIHD.CDM
(including Mylex RAID system drives)
SCSI CD-ROM SCSICD.CDM
SCSI tape drive NWTAPE.CDM
Magneto optical drive SCSIMO.CDM
DLT tape drive DLTTAPE.CDM
IDE CD-ROM IDECD.CDM
IDE disk drive IDEHD.CDM
ASPI compliant NWASPI.CDM
applications such as GAM
1. The appropriate drivers should be loaded before trying to access the
non-disk devices. For example, to use NetWare's Sbackup utility, do the
following:
: load mdac.ham
: load nwtape
: load tsa500
: load tapedai
: scan for new devices
: load sbackup
Except for the mdac.ham driver, .NLM files are supplied by Novell.
Refer to the Novell documentation for instructions on running Sbackup.
2. Load the following drivers to use a CD-ROM under NetWare 5.0 (the
.nlm, cdrom, is supplied by Novell):
: load mdac.ham
: load scsicd.cdm (in the startup file)
: load cdrom.nlm
After the CD-ROM is mounted, the volume on the CD-ROM can be
mapped from any workstation and accessed.