Mylex Disk Array controller Software Kit 2.01, Installation Manual And User'S Manual

Page: 77 / 172

Windows NT
Manual No. 771929 3-29
W
I
N
D
O
W
S
N
T
3
DMI Manual Configuration
DMI files are available for the Mylex Disk Array Controller running under
Windows NT. The DMI will act as a general monitor to locate events such
as, hard disk status, driver identification, etc.
DMI files must be manually configured after they are copied into the server
directory by the GAM server installation.
DMI is selected in the sub-component dialog box during the Global Array
Manager Server installation. The DMI subcomponent can also be installed
by itself via the server installation utility.
Use the SRVCCFG.EXE utility to configure the DMI files.
You will need to run the following command line from the GAMSERV
directory to install the mdacci service manually:
%SystemRoot%\system32\gamserv\mdacci.exe
DMI Files
There are three DMI files:
• MDAC.MIF
• MDACCI.EXE
• SRVCCFG.EXE
These files will be copied into the appropriate directory path during the
GAM Server installation process:
%SystemRoot%\system32\gamserv\mdac.mif
%SystemRoot%\system32\gamserv\mdacci.exe
%SystemRoot%\system32\gamserv\srvccfg.exe
If the GAM Server installation detects the system environment variable
(%win32dmipath%) created by Intel’s LANDesk Server Manager, these
files will also be copied into the following locations:
%win32dmipath%\mifs\mdac.mif.
%win32dmipath%\bin\mdacci.exe.
☛
Note
If you are using Intel LANDesk Service Manager, you
do not need to manually configure mdacci.exe. Intel’s
application will take care of this.