User’s Guide DrafStation and Drafstation Pro
Chapter 3: Basics
55
AP-75730, Rev. 2.1, 19/01/2009
Step 6 :
Softly push the knob of the cutter holder, and rotate the cutter holder lever (2) to the illustrated
direction simultaneously. See image below.
N° Name
1 Cutter
holder
2
Cutter holder lever
Notes
•
Do not strongly press or suddenly release the cutter holder knob, to prevent the built-in spring from
springing out.
•
Do not push the cutter holder to the end. The cutter blade will damage the inside of the plotter.
Step 7 :
Remove the cutter as shown on the image below.
N° Name
1 Cutter
Notes
•
The used cutter must be put in a vinyl bag or bag used for this kind of waste. Disposal of a cutter blade
has to be done in compliance with the regulations and instructions of the local authorities.
Step 8 :
Insert the new cutter as shown in the image below.
N° Name
1 Cutter
