manualshive.com logo in svg

MUTOH DrafStation, User Manual

The MUTOH DrafStation User Manual is a valuable resource for users seeking comprehensive instructions on operating their MUTOH DrafStation printer. This manual can be easily downloaded for free from our website, allowing users to access step-by-step guidance and troubleshooting tips, enhancing their printing experience.

Share
Download
background image

 

 

User’s Guide DrafStation and Drafstation Pro

Chapter 2 :Product Overview

 

 

 

 

 

 

 24 

AP-75730, Rev. 2.1, 19/01/2009 

 

2.2.6 Operation panel 

 

This section explains the name and the function of each operation key and status light. 
 

 

 

 

The operation keys have 2 different functions, depending on the plotter mode:   
 

Mode Key 

functions 

Normal mode  Various functions for printing can be performed on the operation panel. 

Menu mode 

Various setup items (e.g. IP address, HPGL settings, pen setup, etc…) can be set on the 
operation panel. 

 

For details on the plotter mode, refer to “Plotter mode. “

Summary of Contents for DrafStation














































































































































Reviews:

No comments

Related manuals for DrafStation

Brands by name

Popular brands

Load more brands