User’s Guide DrafStation and Drafstation Pro
Chapter 6: Printer menu
118
AP-75730, Rev. 2.1, 19/01/2009
6.2.3.2 MediaSet Menu
To make various settings on media.
Notes
•
If using non dedicated media (user media), the following problems may occur :
ο
Media detection error
ο
Slanting, snagging and wrinkling of media
ο
Media
jams
ο
Poor print quality due to blots and blurs in the prints.
ο
End detection of roll media cannot be performed.
•
The problems caused by the use of non dedicated media will not be covered by the warranty and repair
expenses will have to be paid by the customer.
MediaSet
User 1
User 2
…
Film
Photo
Coat
…
Condition
Photo
Lines
Sets dither condition (optimize for lines or
Photo)
PlotReso
360
720
…
Sets plotresolution
Direction
Bi-Dir
Uni-Dir
Print unidirectional or bidirectional
ThinOut
(Black)
70%
…
Sets percentage of ink for the black head
when filling a surface, using HPGL
commands
ThinOut
(Colour)
70%
…
Sets percentage of ink for the colour heads
when filling a surface, using HPGL
commands
Inkdrytimer
0s
10s
…
Sets the time the machine must wait before
starting the next print or sheet off, in order
to have sufficient curing of the ink.
PF :
Initial Print
Initial
Change
Confirm Print
Micro Print
Micro
Change
Print stepadjust line
Enter measured value of printed line for
correction
Confirm the change of the line
Print pattern to judge step (other method)
Set change in step
Stiffness
Normal
Soft
…
Control the fans that create the vacuum to
keep the media flat.
