MUTOH DrafStation User Manual Download

Page: 70 / 141

User’s Guide DrafStation and Drafstation Pro

Chapter 3: Basics

AP-75730, Rev. 2.1, 19/01/2009

3.10.4 Installing the Windows plotter driver for USB connection

Notes

•

The USB connection can be used when your PC's Operating System is Windows 98, or Windows

2000/XP.

- READ THIS FIRST - :

Be sure to read and understand the safety warnings before handling the printer.

The procedure to install the plotter using the USB connection consists of 2 parts and a third, optional part.

Part 2 and Part 3 are separately presented for Windows XP and Windows 2000.

Follow the procedure in the following order:

Part 1: Mutoh installer

↓

Part 2: Win XP PnP mode
Part 2: Win 2000 PnP mode

↓

Part 3: Win XP Guide mode: OPTIONAL: Use only when PnP has failed and a print error occurs.
Part 3: Win 2000 Guide mode: OPTIONAL: Use only when PnP has failed and a print error occurs.

Summary of Contents for DrafStation














































































































































Search results

Summary of Contents for DrafStation

Reviews:

Related manuals for DrafStation

Brands by name

Popular brands

MUTOH DrafStation, User Manual

Search results

Summary of Contents for DrafStation

Reviews:

Related manuals for DrafStation

Brands by name

Popular brands