User’s Guide DrafStation and Drafstation Pro
Chapter 3: Basics
59
AP-75730, Rev. 2.1, 19/01/2009
3.9 TRANSFER AND TRANSPORTATION
This section describes the transfer and transportation of the plotter.
3.9.1 Transferring the plotter
Be sure to read and understand the safety warnings before handling the printer.
Describes how to transfer the plotter.
When using the dedicated stand, transfer the plotter following the procedure below.
(1) Pre-transfer steps
Step 1 :
Verify that the plotter has been switched OFF.
Step 2 :
Verify that the butterfly bolts attaching the stand with the plotter, are not loosen.
Step 3 :
Verify that the plotter head is in the rightmost position.
Step 4 :
Attach the protective material (metal plate) for attaching the head unit (1), and fix it with
thumbscrews (2).
N° Name
1
Protective material (metal plate) for attaching
the head unit
2 Thumbscrew
Step 5 :
Remove the scroller.
Step 6 :
Unplug and remove all cables.
