User’s Guide DrafStation and Drafstation Pro
Chapter 6: Printer menu
124
AP-75730, Rev. 2.1, 19/01/2009
6.3 OPERATING FROM THE OPERATION PANEL
Be sure to read and understand the safety warnings before handling the printer.
This section describes various functions which will be operated from the operation panel.
Notes
•
For names and functions of each key, refer to
“
Operation panel.
“
6.3.1 Feeding media
To feed media, follow the steps below.
Step 1 :
Verify that the plotter is in Normal mode.
Step 2 :
Check that the media hold lever is positioned to the front side (lever down).
Step 3 :
Press the [Forward feed
↓
] key or [Backward feed
↑
] key on the operation panel.
Result: Media is fed forward or backward.
Notes
•
When sheet media has been loaded, media feed cannot be performed.
Step 4 :
Release the [Backward feed
↑
] key or [Forward feed
↓
] key on the operation panel after feeding
the media to the desired position.
