User’s Guide DrafStation and Drafstation Pro
Chapter 7: Troubleshooting
136
AP-75730, Rev. 2.1, 19/01/2009
7.2.3 Data error display and remedies
This section describes the details of the display when an error message appears and its remedy.
A data error appears if data communication between your PC and the plotter has failed.
If a data error occurs, the following error message appears on the operation panel of the plotter and
operation stops.
When the cause of the error is solved, the plotter starts operating again.
N° Display
Description
Remedy
Reference
1 I** Error [ ]
An error occurred when
receiving data.
Check the communication requirements
between the plotter and your PC.
Menu setup on the
operation panel”
Notes
•
"***" in the error message is the code no. that indicates what type of error occurred.
7.2.4 Command error display and remedies
This section describes the details of the display when a command error occurs and its remedy.
A command error is displayed if a certain failure occurs during analysis of the command data sent from your
PC to the plotter.
If a command error occurs, the following error message appears on the operation panel of the plotter and
operation stops.
When the cause of the error is solved, the plotter starts operating.
N° Display
Description
Remedy
Reference
1 MH** Error [ ]
An invalid command has been
sent from the computer.
Check that the settings on your PC and
the plotter are the same.
Menu setup on the
operation panel”
Notes
•
"***" in the error message is the code no. that indicates what type of error has occurred.
•
The command code representing the error occurred is indicated in [ ].
•
For the settings on your PC side, refer to the Operating Guide attached with your PC.
