Muratec F-520, Network Manual

Page: 50 / 111

4-3 E-mail / I-Fax settings
1
2
3
4
5
6
7
8
9
10
11
12
13
14
A
E-mail / I-F
ax settings
Setting Description
Sender
Information
Name Enter a name that is displayed in the sender field of
the e-mail sent from your machine.
Up to 40 characters can be registered.
E-mail address Enter an e-mail address assigned to your machine.
Up to 50 characters can be registered.
Mail Server
Sending mail (SMTP)
server
Enter a domain name or an IP address of the SMTP
server for sending e-mail.
When entering a domain name, you can enter up to 50
characters.
Receiving mail (POP3)
server
Enter a domain name or an IP address of the POP3
server for receiving e-mail.
When entering a domain name, you can enter up to 50
characters.
User ID for POP3 Enter the user ID used when logging on to the POP3
server.
Up to 50 characters.
Password for POP3 Enter the password used when logging on to the POP3
server.
Up to 50 characters.
Check for New Mail This setting establishes the interval at which the mail
server is checked for new mail. The minimum value is
5 seconds and the maximum is 99 hr 59 min 59 sec.
The initial value is 10 min.
To keep this system from checking for e-mail auto-
matically, set all of these values to 0.
Receive before Send. For some providers, POP authentication is required
before sending (send request to SMTP server). In this
case, check this item.
SMTP Port No. Enter the SMTP port number. (1–65535)
Default: 25
POP3 Port No. Enter the POP3 port number. (1–65535)
Default: 110
Select POP3 Auth.
Method
APOP (Authenticated POP) is a POP security protocol
that encrypts the POP password when connecting
with the POP server. If APOP is available on the POP
server you are using, select “APOP”. Otherwise, select
“Normal”.
Select SMTP Auth.
Method
Select the SMTP authentication method if the SMTP
server you are using requires authentication.
User ID for SMTP Enter the user ID used when logging on to the SMTP
server, if necessary.
Up to 50 characters can be registered.
Password for SMTP Enter the password used when logging on to the
SMTP server, if necessary.
Up to 50 characters can be registered.