MULTILIFT XR S, User And Maintenance Manual

Page: 28 / 210

XR21S59 CHU
28
1/2018
113813003
Hooklift Multilift XR21S59 CHU
User Manual
The operation of the hooklift must take place in the correct sequence, one operation at
the time.
During the loading operation, the handbrake should not be activated UNTIL THE REAR
END OF THE FLATRACK/BODY IS LIFTED FROM THE GROUND!
When unloading, the hand brake should be released WHEN THE REAR END OF THE
FLATRACK/BODY TOUCHES THE GROUND!
When loading, unloading or tipping a flatrack/body, check that there are no people too close
to the operation, and check for any possible unusual or disruptive movements or sounds
caused by the flatrack/body. If you notice anything like this, STOP THE OPERATION. Find
out the reason for this carefully. Do not continue the operation before the cause has been
established! Failing to do this could result damaging the flatrack/body or the XR equipment.
The disruption must be remedied before the operation is continued.
NEVER LOAD, UNLOAD OR TIP IN DANGEROUS SITUATIONS:
• When the load is heavier to one side of the body
• Illegally heavy load
• Sloping or slippery ground
• Soft or crumbly ground under the truck wheels
• Strong side wind, over 20 m/s (70 km/h)
• Frozen or stuck load
TRUCK PROBLEMS:
• Weak springs on one side
• Poor condition of tyres.