MSA SUPREMATouch MCP 20, Operating Manual

Page: 46 / 241

46
Entering System Parameters
GB
SUPREMATouch
Password
This window displays parameters that affect the entire system.
Fig. 27 Password
Command Selection Field
List of all available commands for switch inputs.
Commands: reset and acknowledge of single measuring points,
single measuring point groups, all events, power faults.
Power fault has no effect in standard operation mode.
Group Selection Field
List of all available entities (e.g. measuring points or groups)
this command should be applied to.
OK Button
Press this button to accept the settings entered for the selected
switch input. After tapping the button, the parameters are imme-
diately checked to see if they are valid. If the parameters are
valid, they become part of the system's parameter set. If they
are not valid, a warning appears.
Cancel Button
Press this button to discard the settings entered for the selected
switch input.
Clear Button
Press this button to delete all parameters for the selected switch
input. The switch input will then return to inactive status.
Field Field Type Function
Password/
Confirmation:
Text input,
8 characters;
AUER by
default
See chapter
2.8 "Safety Concept"
OK Button
Tap this button to accept the settings entered. After the button
is tapped, the parameters are immediately checked to see if
they are valid. If the parameters are valid, they become part of
the system’s parameter set. If they are not valid, a warning
appears.
Cancel Button Tapping this button cancels the settings entered.
Field Field Type Function