MSA SUPREMATouch MCP 20, Operating Manual

Page: 48 / 241

48
Entering System Parameters
GB
SUPREMATouch
Time Window
This window displays the date and time of the system.
Fig. 29 Date/Time
Field Field Type Function
Date/Time
Date/Time
input
Date and time are set by tapping the input field and entering the
new date and time in the date/time field.
After this window is closed, the new date and time is displayed,
but it does not become valid until the (OK) button is tapped.
Time zone
Selection,
UTC by
default Tap this field to select the time zone. The correct setting of the
timezone is required for the automatic time synchronization
function.
DST mode
Selection,
none by
default
Tap this field to select and activate the automatic adjustment for
daylight saving time. This function works independent for the
time synchronization, but the correct setting of is required for the
automatic time synchronization function.
Synchroniza-
tion Checkbox, not
set by default Activating this field activates the automatic time synchroniza-
tion.
Update now Button Tapping this button starts a time synchronization immediately.
(S)NTP Server
Text, 40 char-
acters; empty
by default
This field defines the time server to be used for automatic time
synchronization. It is possible to define the time server using a
IP address or a server name. When using a server name, a valid
DNS server has to be set in the TCP/IP window.
Last update Static
This field gives information about the last successful time
synchronization.
OK Button
Tap this button to accept the entered settings. After tapping the
button, the parameters are immediately checked to see if they
are valid. If the parameters are valid, they become part of the
system’s parameter set. If they are not valid, a warning appears.
Cancel Button Tapping this button cancels the settings entered.