MSA SUPREMATouch MCP 20, Operating Manual, Page: 21 / 241

21
System Operation
GB
SUPREMATouch
If the user is in the List , Bars or LEDs window and does not tap any key for 60 seconds, the window
automatically starts scrolling (one page per 5 seconds).
(1) To scroll through the list manually use the arrow buttons in the lower left corner of the window
or move the list while touching it.
For all display types, it is possible to manually switch between different modes of displaying the
measured information. In one mode all inputs are shown, in the other modes only the inputs in
alarm or fail status are shown.
(2) To switch between modes touch the bell or the sign symbol in the lower right corner of the
measure window.
If one of these selection modes is chosen, the corresponding symbol has a blue background.
The number of measuring points in alarm and in fail and the CAN bus, A or B, currently
selected as the information source is also shown in this area.
It is possible to switch to the CAN bus by touching the CAN symbol. If the CAN bus is manually
selected, the CAN symbol has a blue background. If the CAN bus is automatically selected, the
CAN symbol has a grey background.
Modes
Mode Display Indicated by
All Inputs
In this mode, all the measured inputs in the system are
displayed. The inputs are arranged by their input number.
Alarm Inputs
When no alarm is triggered, this mode behaves like the All
Inputs Mode .
As soon as alarms are triggered, only the inputs in alarm are
displayed, sorted by the time of alarm triggering.
Fail Inputs
When no measuring point is in fail status, this mode behaves
like the
All Inputs Mode .
As soon as at least one input is in fail status, only the inputs in
fail status are displayed, arranged by their input number.