MP Filtri UFM Series, Use & Maintenance Manual

Page: 61 / 136

UFM051
Put the lances in their respective housings (
!
- Fig. 22), anchored to the frame paying attention to the fluid still present in the hoses.
Rewind the power supply cable.
The UFM051 is equipped with a thermal protection device against electrical overloads, short circuits and overheating. If a "BLOCK"
occurs, check the operating conditions (e.g. clogged filter, fluid conditions, motor overheating, etc.) and reset the thermal protection
by pressing the appropriate button on the side of the motor terminal box.
6.4.6 Operating limits and environmental limits
The trolley is designed to operate at a maximum pressure of 10 bar.
The electric motor is designed to operate according to the rating plate data.
For use in environments with very cold or very hot temperatures, refer to the technical data provided in Section 5.
6.5 Normal and scheduled maintenance
The UFM051 does not require particular maintenance interventions, it is in any case a good rule to check the perfect condition
of the suction and discharge hoses before each use. Check that the filter element is correctly installed and that the filter cover is
tightly screwed on.
Periodically check the tightness of the hydraulic connections and if the electrical cable ends in the motor terminal box are tight.
Also check the cleanliness of the "Y" shaped filter for any accumulated macro impurities, so as to preserve the filter element
(CU4005/4006).
Check the expiration date of the particle counter calibration certificate.
6.5.1 Oil leaks
Oil leaks can form on the joints of the hoses and on fittings if any connections or screws are loosened, in which case we recommend
checking the correct tightness.
If the operations described above are not able to solve the problem, contact the manufacturer.
Lance holders Fig.22
To keep the efficiency of the particle counter high, it is advisable to send it once a year to our headquarters for
inspection, monitoring, testing on the test bench and issuing a new calibration certificate.
CAUTION
!
CAUTION
!
With oil temperatures above 40/45° C, give special caution to the handling of the metal lances/tubes and movement of the
trolley. Avoid direct contact with hot oil, the mobile filtration unit and its installed components.
Mobile filtration unit
59