MP Filtri UFM Series, Use & Maintenance Manual

Page: 16 / 136

4 Mobile transfer and filtration units
The UFM series mobile filtration units are machines designed for transferring and filtering lubricants and hydraulic oils.
The UFM015 version can be moved thanks to the use of handle and low weight, all other versions have wheels for moving.
They can be used with fluids at different temperatures (therefore different viscosities) as long as they fall within the limits indicated
by this manual.
Operation with Mineral Oils, Synthetic Fluids & HFCs.
The machine can be used for:
TRANSFER
- transferring from drums into tanks
- to top up from drums into tanks
FILTRATION
- off-line filtration in tanks
- additional off-line filtration system in tanks
- off-line filtration of new oil into drums or underground/large tanks
- Particle counting and determination of cleanliness class according to ISO4406, NAS1638, AS4059
(only for versions with ICM mounted on UFM051-091-181-919)
- Measurement of the water saturation level (RH) contained in the fluid and of the temperature
Depending on the version, the mobile filtration units can use filter elements and cartridges with different filtering media, filtration
degree and dimensions; the fibre filter elements have high storage capacity and absolute filtration
ß
x(c)
>1000.
Single-phase and three-phase electric motors.
Wide range of flow rate, from 15 l/1’ to 180 l/1'.
Optical and electrical systems for filter monitoring.
Electrical systems for greater safety:
- unit shutdown in case of clogged filter
- unit shutdown when the set cleanliness class is reached (particle counter version only)
Before commissioning the equipment make sure:
- you have read this manual carefully
- check the good condition of the mobile filtration unit
- report any damage or breakages suffered by the mobile filtration unit during transport
- verify the presence of all the accessories supplied
For other types of fluids contact our technical / commercial service.
NOTE
NOTE
Mobile filtration unit
14