MP Filtri UFM Series, Use & Maintenance Manual

Page: 103 / 136

UFM181
6.4.2 Power on
Insert the electric plug into a three-phase socket (Fig. 6) depending on the version (check the voltage).
Check the direction of rotation in the version with three-phase motor: Operate the switch for a few seconds and observe the
direction of rotation of the electric motor. The direction observed on the fan side must be clockwise, otherwise the phases L1 and
L2 must be inverted (Fig. 7).
Three-phase electric power supply with protective conductor is required for the power supply of the trolley.
Electrical connection for
the three-phase motor
(5 poles plug) Phase inverter only for
version with ICM2.0
particle counter
NOTE
Fig.6 Fig.7
Models:
UFM181TA3021P01
Once inserted, turn the switch to "I"
(Fig. 10 - General power supply), then press
the on button "I" on the electrical panel (Fig. 11).
At this point the transfer and filtration of the
fluid begins.
With electric indicator and
particle counter With electric indicator and
particle counter
Button
general power supply
Button
ON/OFF
Fig.10 Fig.11
Models:
UFM181TA3020P01
Once the plug has been inserted, press the
button a (Fig. 8 - general power supply),
press the ignition switch "I" on the electrical
panel (Fig. 9).
At this point the transfer and filtration of the
fluid begins.
With electric indicator With electric indicator
Button
general power supply
Button
ON/OFF
Fig.8 Fig.9
Operate the switch for a few seconds and observe the direction of rotation. The direction observed on the fan side must
be clockwise, otherwise the phases L1 and L2 must be inverted.
NOTE
CAUTION
!
Before starting up the electric motor, make sure that the suction lance (IN) is immersed in the fluid.
5 poles plug for the three-phase motor
Mobile filtration unit
101