MP Filtri UFM Series, Use & Maintenance Manual

Page: 38 / 136

6.4.5 Shutdown
On/off knob
Fig.2
When the operations have been completed, turn off the electric pump by turning the shut-off knob to
"0" on the terminal box of the electric motor (Fig. 2) and disconnect the electrical connection plug.
Put the lances in their respective housings (
!
- Fig. 3), anchored to the frame paying attention to the
fluid still present in the hoses. Rewind the power supply cable.
The UFM041 is equipped with a thermal protection device against electrical overloads, short circuits and overheating.
If a "BLOCK" occurs, check the operating conditions (e.g. clogged filter, fluid conditions, motor overheating, etc.) and reset the
thermal protection by pressing the appropriate button on the side of the motor terminal box.
Lance holders
Fig.3
6.4.6 Operating limits and environmental limits
The trolley is designed to operate at a maximum pressure of 5 bar.
The electric motor is designed to operate according to the rating plate data.
For use in environments with very cold or very hot temperatures, refer to the technical data provided in Section 5.
6.5 Normal and scheduled maintenance
The UFM041 does not require particular maintenance interventions, it is in any case a good rule to check the perfect condition
of the suction and discharge hoses before each use. Check that the filter element is correctly installed and that the filter cover is
tightly screwed on.
Periodically check the tightness of the hydraulic connections and if the electrical cable ends in the motor terminal box are tight. Also
check the cleanliness of the "Y" shaped filter for any accumulated macro impurities, so as to preserve the filter element (MR2504).
CAUTION
!
With oil temperatures above 40/45° C, give special caution to the handling of the metal lances/tubes and movement of the
trolley. Avoid direct contact with hot oil, the mobile filtration unit and its installed components.
Mobile filtration unit
36