MP Filtri UFM Series, Use & Maintenance Manual

Page: 34 / 136

6 Installation procedures and general operation
6.1 Introduction
The mobile filtration units are suitable for the following fluid operations:
- Transfer with filtration
- Off-line filtration (maximum recommended volume 350/500L)
The standard version of the filtration unit is delivered without a filter element, before its use install an original MP Filtri filter element
suitable for the type of unit being used (see filter element codes listed in Table 6.7.2 Item.8) and carry out the procedures described
in Section 6.2 "Filter element installation".
6.2 Filter element installation
Opening the cover
Insert the filter element
into the filter
Insert the element seat
into the filter element
Check the correct
positioning of the element
seat/spring/cover and
filter closure
Insert the bypass spring
Tighten the cover
Tighten the nut up to the
stop
3
7
4 2
6
1
5
These operations must be performed with the machine off. Do not turn on the unit without first installing the filter
element. Check that the filter element is inserted correctly.
CAUTION
!
We recommend using only original MP Filtri filter cartridges.
NOTE
!
Mobile filtration unit
32