MP Filtri UFM Series, Use & Maintenance Manual

Page: 15 / 136

GENERAL WARRANTY CONDITIONS
3 Warranty, limits and exclusions
1 - The seller assumes a guarantee of the normal mechanical operation of their product for a period of one year (except as provided
for in Item H4 referred to the general conditions of sale and warranty sent with each order confirmation) from the delivery date.
2 - The warranty is limited to the replacement of damaged or defective parts due to poor quality of the material or construction. It
does not extend to defects due to normal wear or due to inexperience or negligence of the customer and to parts that due to
the composition of the material or the nature of their use are subject to rapid wear.
3 - Damage or defects must be declared, under penalty of forfeiture, by registered letter within eight days of discovery.
The seller, once being aware of the existence of the defect, is obligated to replace the defective elements if they have not been
tampered with due to attempted repair or modification by the customer (or third parties), and provided that he has punctually
fulfilled the contractual obligations, with particular regard to payments which, if not carried out in the manner and within the
agreed terms, entail the forfeiture of the guarantee and the seller's right not to effect the replacements.
4 - Any other indemnity, request for compensation for damages, also by third parties, due to production shutdown of the customer
is expressly excluded.
5 - The items to be replaced must be sent with transport costs to be paid by the purchaser ex works of the seller who will replace
them as soon as possible with delivery to their premises. The replaced parts belonging to the customer remain at his disposal
for eight days within which they can be collected; following this deadline the seller is entitled to regard them as scrap in his
possession without any compensation.
6 - The examination of the failures and their causes will always be carried out in the seller’s workshops and all the related costs
will be borne by the customer. The customer is also responsible for all inspection costs that may be requested on site. In no
case may the customer demand the termination of the contract.
7 - The warranty is not transferable and applies only to the invoice recipient.
8 - The warranty is no longer valid when one of the following conditions is the case:
a) payments are not made by the client in the manner and terms agreed
b) tampering with what is provided without the seller's explicit authorisation
c) improper use of what is supplied
d) failure to perform maintenance
e) installation, modification, replacement of parts or of what is supplied
Mobile filtration unit
13