8 DenEdit Settings
Rev. 02/2019
71
Proceed as follows:
1.
Connect the device to the PC with the USB cable.
2.
Start up DenEdit.
3.
Establish a connection between the software and the device via the menu entry
Connection -
> Connect USB
.
4.
Load the parameter file corresponding to your engine via the menu entry
Connection -> Open
Parameters
.
The file name indicates which file corresponds to which DetCon device type and to which
engine. See also the following example.
Name of the parameter file
The file name of the parameter file indicates the engine associated with the
file. The file extension indicates the DetCon device type for which the file
must be used. For example:
–
File: 0824.de2
Engine: MAN E0824E
DetCon: DetCon2
–
File: 2842E.den
Engine: MAN E2842E
DetCon: DetCon20
Summary of Contents for DetCon series
