5 Installation Instructions
52
Rev. 02/2019
–
On the cylinder head screws
Especially when it comes to engine conversions, it has proven to be worthwhile to attach the
knocking sensors on cylinder head screws or -bolts.
Drill an M6-hole with a maximum depth of 12 mm (0.47") in the cylinder head screw and fix
the
detonation sensor
with a screw of type M 6x25-10.9 and an adapter sleeve to fill the
hollow space
–
On the nuts of the cylinder head studs
Contact the engine manufacturer if you are not sure whether the cylinder head screw is suitable
for the installation.
Summary of Contents for DetCon series
