57
Rev. 02/2019
Tightening torque of the connection terminals
The tightening torque for the connection terminals in the DetCon is 0.5 Nm.
6.1
Wiring of the Detonation Sensors
Mount the detonation sensors in accordance with the firing order of the cylinders. To do this,
enter the firing order of your engine in the following table and connect the sensors with the
assigned cylinders and the corresponding inputs on the DetCon according to the resulting
sequence.
If all cylinders are not fitted with detonation sensors, the first detonation sensor is assigned to
the first cylinder used in the firing order. For example, if only the 3rd and 5th cylinders in the
firing order are provided with detonation sensors, the first detonation sensor is mounted on the
3rd cylinder and the first detonation sensor input is connected to the DetCon.
Sensor/ Input
on DetCon
Firing order
of cylinders
Sensor/ Input
on DetCon
Firing order
of cylinders
1
11
2
12
3
13
4
14
5
15
6
16
7
17
8
18
9
19
10
20
6 Wiring of the Device
Summary of Contents for DetCon series
