5 Installation Instructions
Rev. 02/2019
49
5.3
Mounting the Detonation Sensors
Danger of explosion!
Only use the detonation sensor approved by MOTORTECH and the required
number of blocking capacitor boards for operation in hazardous areas.
P/N
Description
43.20.001
Detonation sensor without sensor lead, two-pole
43.30.004-60
Detonation sensor lead, 18 m (59.06 ft)
43.20.029
Blocking capacitor board (ATEX)
Use MOTORTECH detonation sensors
DetCon detonation controller systems are parameterized for operation with
MOTORTECH detonation sensors (piezoelectric acceleration transducers).
The use of other sensors entails a new calibration of the engine.
Observe the instructions of the engine manufacturer
The following mounting instructions are for orientation only. In any case,
observe the instructions of the respective engine manufacturer for the
installation of detonation sensors and the installation of detonation
controllers.
Dimensions of the Sensor
Summary of Contents for DetCon series
