5 Installation Instructions
Rev. 02/2019
53
Mounting the blocking capacitor board for use in hazardous areas
A blocking capacitor board has four outputs. If all 20 possible knock sensor inputs are used with
a DetCon20, then five blocking capacitor boards are required.
One blocking capacitor board is used for each of the four knock sensors required.
1.
Plug the required blocking capacitor boards into the connectors (marked red in the figure)
for the knock sensors on the DetCon20.
2.
The wiring of the knock sensors has to be done as described above, with the difference that
you now use the connector plug on the blocking capacitor board.
Summary of Contents for DetCon series
