4 Product Description
Rev. 02/2019
29
4.1.3
Warning Notices on the Device
The safety instructions on the device or on the enclosure are valid for the DetCon and all
connected components.
Variant
Information text
ATEX and CSA
WARNING – EXPLOSION HAZARD – Substitution of components may
impair suitability for Class I, Division 2. Do not disconnect equipment
unless power has been switched off or the area is known to be non-
hazardous.
All
WARNING! Read and understand the installation and operation manuals
prior to installing or making any adjustments.
ATEX
EXPLOSION HAZARD – Do not open enclosure or disconnect while circuit
is live unless area is known to be non-hazardous. For wiring details
please refer to operation manual.
ATEX
The device must be installed and operated only in an environment that
ensures a pollution degree 2 (or better) according to IEC/EN 60664-1.
All
CAUTION – Do not pressure wash this ignition module. Damage to
electronic components may result.
CSA
EXPLOSION HAZARD – Do not disconnect while circuit is live unless area
is known to be non-hazardous. For wiring details please refer to
operation manual
Summary of Contents for DetCon series
