5 Installation Instructions
42
Rev. 02/2019
ATEX Protection!
Some versions of the ATEX-certified DetCon20 have an external ATEX
protection connected to the CAN bus and the inputs. This external ATEX
protection must not be removed in order to prevent possible flying sparks.
If you do not see this protection externally, it is installed internally.
Risk of Destruction!
When mounting the device, it must be ensured that no vibrations occur
during operation and that temperatures are not exceeded. Otherwise
electronic components can be destroyed. Please read the section
Mechanical data.
Use of wire end sleeves
When connecting the cables to the DetCon detonation controller, use wire
end sleeves to protect the stripped ends.
Summary of Contents for DetCon series
