GETTING STARTED
iDEN
78
Task 11: Writing
I
DEN C
OMPANION
P
RO
Data to the Phone
To write
I
DEN C
OMPANION
P
RO
file data to your phone:
1.
Set up the programming hardware as described in ““Setting Up the
Programming Hardware” as described on page 16.
2.
Click on the title bar of the desired
I
DEN C
OMPANION
P
RO
file
to make it
active.
3.
Select
Tools/Options
. Check the setting in the Serial Port field. The
setting displayed should be the
COM
Port that the programming cable is
connected to.
4.
Select
File/Write Phone
. A progress bar will be displayed and should
begin progressing toward 100 percent, indicating the status of the write
process.
Never disconnect the data cable from the iDEN
phone or power off the PC during the programming
process. This can cause data to become corrupted
and can damage the unit.
NOTE: If the progress bar does not appear or an error occurs, refer to
Troubleshooting the Hardware Setup (page 94).
Tu
to
ri
al
Tutorial
