ALTERNATOR
Name
Torque in Nm
Alternator fixing screw - TCEI M8x45 (1)
22 Nm (16.23 lbf ft)
Alternator fixing nut - M10x1.5 (1)
30 Nm (22.13 lbf ft)
Alternator pulley nut on crankshaft - M16 (1)
80 Nm (59 lbf ft) - Loctite 243
Belt tension
50 Nm (36.88 lbf ft)
Alternator belt cover screw - TCEI M6x16 (4)
10 Nm (7.38 lbf ft)
Alternator belt cover screw (radiator bracket retainer) TCEI
M6x40 (2)
10 Nm (7.38 lbf ft)
GEAR
Name
Torque in Nm
Gear shift cable lever nut
10 Nm (7.38 lbf ft)
Gear shift tie rod lever nut on gear pre-selector
10 Nm (7.38 lbf ft)
Gearbox to crankcase fixing nut - M8 (5)
20 Nm (14.75 lbf ft)
TE flanged screw fixing gearbox to crankcase - M8x45 (1)
20 Nm (14.75 lbf ft)
Oil cap M18x1.5 (1)
28 Nm (20.65 lbf ft)
Breather cap (1)
8 Nm (5.9 lbf ft)
Gear in neutral sensor (1)
10 Nm (7.38 lbf ft)
Oil drainage plug - M10x1 (1)
24 Nm (17.7 lbf ft)
Transmission shaft ring nut (1)
100 Nm (73.76 lbf ft)
OIL RADIATOR
Name
Torque in Nm
Radiator to chassis retainer M6x30 (3)
10 Nm (7.38 lbf ft)
Nipples to radiator retainer M16x1.5 (2)
20 Nm (14.75 lbf ft)
Oil pipes to radiator and engine retainer M16x1.5 (2 + 2)
20 Nm (14.75 lbf ft)
CHASSIS TO ENGINE UNIT
Name
Torque in Nm
M6x40 TCEI DA screw
8 -12 Nm
Reduction
20 Nm
FUEL SUPPLY CONTROL UNIT
Name
Torque in Nm
M5x12 TCEI screw
6 -7 Nm
Stainless M5x16 TBEI flanged screw
6 -7 Nm
M6x25 TCEI DA screw
8 -12 Nm
CHASSIS
Name
Torque in Nm
Front engine to chassis retainer
80 Nm
Transmission to chassis retainer (M M12x230)
50 Nm
Right fixing plate - transmission retainer
25 Nm
Plate clamp - Blow-by retainer
10 Nm
Coil plate retainer
10 Nm
Electronic control unit retainer
10 Nm
Bushings to electronic control unit retainer - M6x35 (1)
10 Nm (7.38 lbf ft) - Loct 243
Tank support rubber rings to chassis retainer (2)
Manual - Loct 243
Filter casing fixing bolts
10 Nm
Left and right footrest plate to chassis upper retainer M8x30 (2
+2)
20 Nm (14.75 lbf ft)
Left and right footrest plate to chassis lower retainer M8x75 (2
+2)
20 Nm (14.75 lbf ft)
Brake switch on plate retainer
Manual
Chrome-plated ring to plate retainer M5x10 (6)
6 Nm (4.42 lbf ft)
Retainer for cable guide on right footrest plate
6 Nm
Support retainer for M6 top boxes with countersunk head (6)
9.6 Nm (7.08 lbf ft)
Support retainer for M6 top boxes (4)
9.6 Nm (7.08 lbf ft)
Screws retainer behind the M6 bead protection (4)
9.6 Nm (7.08 lbf ft)
Screws retainer for M6 chassis supports (4)
23 Nm (16.96 lbf ft)
Cross-member retainer for M6 top boxes (2)
9.6 Nm (7.08 lbf ft)
Characteristics
Stelvio 1200 NTX ABS
CHAR - 16
Revente Interdite - Revendita Vietata - Resaling Forbiden - Wiederverkauf Verboten
