•
The measurement must be taken using
a special thickness gauge.
CAUTION
IF CLEARANCE IS LARGER THAN RECOMMENDED, THE
TAPPETS WILL BE NOISY. OTHERWISE, THE VALVES DO
NOT CLOSE CORRECTLY, WHICH CAN LEAD TO PROB-
LEMS SUCH AS:
•
PRESSURE DROP;
•
ENGINE OVERHEAT;
•
VALVE BURN OUT, ETC.
Braking system
Level check
Brake fluid check
•
Rest the vehicle on its stand.
•
For the front brake, hold the handlebar straight.
•
For the rear brake, keep the vehicle upright so that the fluid in the reservoir is at the same
level with the plug.
•
Make sure that the fluid level in the reservoir is above the "MIN" reference mark:
MIN
= minimum level
MAX
= maximum level
If the fluid does not reach at least the "
MIN
" reference mark:
•
Check brake pads and disc for wear.
•
If the pads and/or the disc do not need replacing, top-up the fluid.
Top-up
Front brake:
•
Unscrew the two screws (1) of the
brake fluid reservoir (2) using a Phillips
screwdriver.
•
Lift and remove the cover (3) and
screws (1) as well.
•
Remove the gasket (4).
Rear brake:
•
Remove the right fairing.
•
Unscrew and remove the cap (5).
•
Remove the gasket (6).
Norge GT 8v
Maintenance
MAIN - 67
Revente Interdite - Revendita Vietata - Resaling Forbiden - Wiederverkauf Verboten