•
When the connector is fully inserted,
the distance between the connector
and the ABS control unit must be 7.5
mm (0.29 in).
•
If the initial position of the connector
and the driving lever is not that shown
in fig. 1, the connector will not be prop-
erly coupled and the distance meas-
ured will be greater (12 mm approx.
(0.47 in)). In this case repeat the oper-
ation as described in the two previous
points.
It is advisable to create a template to check the
correct connector insertion.
•
Fit the protection casing.
Component maintenance
The vehicle is fitted with a two-channel ABS sys-
tem, i.e. it works on both the front and the rear
wheel.
Check periodically and each time the wheels are
refitted, the tone wheel (2) or the sensor (1) re-
placed, that the wheel distance is constant at each
360°. Use a thickness gauge to check the distance
between sensor (1) and tone wheel (2) at three
points at a 120° span. The values should be be-
tween:
Braking system
Norge GT 8v
BRAK SYS - 322
Revente Interdite - Revendita Vietata - Resaling Forbiden - Wiederverkauf Verboten