manualshive.com logo in svg

MOTO GUZZI NORGE GT 8V, Service Station Manual

The MOTO GUZZI NORGE GT 8V is a powerful and elegant touring motorcycle built for adventure. To ensure its optimal performance and maintenance, it is crucial to have the Service Station Manual. Easily download this comprehensive manual for free from manualshive.com to enhance your riding experience and keep your motorcycle in top shape.

Share
Download
background image

Removal

•

Undo and remove the two screws.

•

Remove the brake calliper from the

disc.

•

Turn the pin and pull out the split pin.

•

Remove the split pin.

•

Remove the pin.

•

Extract one pad at a time.

CAUTION

AFTER REMOVING THE PADS, DO NOT OPERATE THE BRAKE LEVER OR THE CALLIPER
PLUNGERS COULD GO OUT OF THEIR SEATS RESULTING IN BRAKE FLUID LEAKS.

•

Insert two new pads, placing them so that the holes are aligned with the calliper holes.

CAUTION

ALWAYS REPLACE BOTH PADS AND MAKE SURE THEY ARE CORRECTLY POSITIONED IN-
SIDE THE CALLIPER.

Norge GT 8v

Braking system

BRAK SYS - 327

Revente Interdite - Revendita Vietata - Resaling Forbiden - Wiederverkauf Verboten 

Summary of Contents for NORGE GT 8V






































































































































































































































































































































































Reviews:

No comments

Related manuals for NORGE GT 8V

Öhlins YA919 Mounting Instructions preview
YA919
Brand: Öhlins Pages: 2
DAELIM ROADWIN 125 FI Manual preview
ROADWIN 125 FI
Brand: DAELIM Pages: 68
KTM 450 SX-F 2019 Owner'S Manual preview
450 SX-F 2019
Brand: KTM Pages: 163
KSR Moto GRS125 2013 User Manual preview
GRS125 2013
Brand: KSR Moto Pages: 51
AMFD RideMaxx Quick Start Manual preview
RideMaxx
Brand: AMFD Pages: 17
Puch Magnum X Service Manual preview
Magnum X
Brand: Puch Pages: 151
KTM F9903S6 Setup Instructions preview
F9903S6
Brand: KTM Pages: 26
rizoma BS232 User Manual preview
BS232
Brand: rizoma Pages: 16
Kabuto IXA Series Owner'S Manual preview
IXA Series
Brand: Kabuto Pages: 6
Pro Moto Billet Fastway PMB-01-5203 Quick Manual preview
Fastway PMB-01-5203
Brand: Pro Moto Billet Pages: 2
DYNATEK D3K3-1 Installation Instructions preview
D3K3-1
Brand: DYNATEK Pages: 4
MOTO GUZZI Mille GT Instructions For Use Manual preview
Mille GT
Brand: MOTO GUZZI Pages: 12
Arai CT-Z Instructions For Use Manual preview
CT-Z
Brand: Arai Pages: 15
Vanucci VUG-1 Instructions For Use Manual preview
VUG-1
Brand: Vanucci Pages: 35
VESPA Bravo Service Station Manual preview
Bravo
Brand: VESPA Pages: 82
Burro Max Burromini-Gas TT40 Owner'S Manual preview
Burromini-Gas TT40
Brand: Burro Max Pages: 34
R&G FI0112BK Fitting Instructions preview
FI0112BK
Brand: R&G Pages: 4
Saddlemen I14-07 Series User'S Manual & Installation Instructions preview
I14-07 Series
Brand: Saddlemen Pages: 2

Brands by name

Popular brands

Load more brands