MOTO GUZZI California 1400, Instructions Manual

Page: 57 / 411

•
Pull the filler plug / oil level dipstick (1)
straight out.
•
Wipe the oil level dipstick (1) clean and
reinsert it.
•
Pull it out again and check the oil level.
•
The oil level is correct when it is close
to the "MAX" mark. Otherwise, top-up
with engine oil.
CAUTION
DO NOT ADD ADDITIVES OR ANY OTHER SUBSTANCE TO THE FLUID. WHEN USING A FUNNEL
OR ANY OTHER ELEMENT, MAKE SURE IT IS PERFECTLY CLEAN.
Replacement
NOTE
HOT OIL IS MORE FLUID AND WILL DRAIN OUT MORE EASILY AND COMPLETELY.
•
Place a container with + 4000 cm³ (244
cu.in) capacity under the drainage plug
(2).
•
Unscrew and remove the drainage
plug (2).
•
Pull out the oil filler plug / engine oil
level dipstick (1).
•
Drain the oil into the container; allow
several minutes for oil to drain out com-
pletely.
•
Insert the oil filler plug / engine oil level
dipstick (1).
•
Check and if necessary, replace the
sealing washers of drainage plug (2).
•
Remove any metal scrap attached to
the drainage plug (2) magnet.
•
Screw and tighten the drainage plug
(2).
DO NOT DISPOSE OF OIL INTO THE ENVIRONMENT.
DISPOSE OF ENGINE OIL IN A SEALED CONTAINER AND
TAKE IT TO YOUR SUPPLIER OR TO THE NEAREST USED
OIL COLLECTION CENTRE.
California 1400
Maintenance
MAIN - 57