AGITO
3 - Introduction
AGITO User Manual OS 5.0 Nova
Model
AGITO CORE V1.1 (DIODE BOARD ENABLED)
Battery Type
Lithium-Ion, 48v DC, 99.9Wh
Peak Current (AGITO Sports)
20A (typical) at 20Kg payload
Run-time
30-90+ mins, depending upon operational settings
Charging Time
45 mins approx.
Data Type / Baud Rate
RS-232 / 115200
Model
AGITO MASTER V1.0
Power Range
12-30v DC
Run-time
4+ hrs, depending upon operational settings and batteries used
Data Type / Baud Rate
RS-232 / 115200
Model
AGITO TOWER V1.0
Power Range
12-24v DC
Model
AGITO MAINS PSU V2.0
Input Voltage
110 - 264Vac (47-63Hz)
Primary Output Voltage
48Vdc
Secondary Output Voltages
12Vdc and 24Vdc
Efficiency
95%
Setup Rise Time
1800ms, 60ms at full load
Output Hold up Time
10ms (typical) at full load
Internal Fan - activation temp
30 °C
Inrush Current
60A @ 230Vac (typical cold start)
Details quoted are for the most recent variant of the module, E&OE.
»
GENERAL SPECIFICATIONS
»
RF SPECIFICATIONS
IT IS THE OPERATORS RESPONSIBILITY TO ENSURE THAT THE RF SETTINGS
ARE CORRECT FOR THE TERRITORY OF OPERATION
AGITO uses RF modules that can be user configured. It is the owner’s responsibility to ensure that the correct
settings are used for the territory that the RF system is being used in. By using AGITO, you acknowledge that
you have read, understand, and agree to this disclaimer. You agree that you are solely responsible for your
conduct while using AGITO and for any direct or indirect consequences that may result from its use.
Motion Impossible supply the system by default with the following settings:
For users in different territories, please consult your local regulatory agency.
When using a third-party RF solution, such as Silvus TriCaster or DTC NetNode/Solo, it is the owner’s responsibility to ensure the settings
used are legal for the territory of operation and that full control of the AGITO is maintained at all times.
Region
Global
EU
North America
Frequency
2.4 GHz
869 MHz
900 MHz
Power
100mW
100mW
100mW
