AGITO
21 - Operating System
AGITO User Manual OS 5.0 Nova
»
SPORTS MODE
Entering this mode will start the connection process with the AGITO Core and configure the system to operate in Sports Mode (Sports
Application)
»
CONNECT / CALIBRATION SCREEN (SPORTS MODE)
The purpose of this screen is to ensure that the AGITO system is correctly configured for Sports Mode operation. The system status window
(centre of display) will display battery telemetry and confirm serial number of the core you are connecting to. It will also confirm the
application mode, i.e. Sports.
The system will then confirm system identification, Configuration and Calibration. If one of these steps requires action, e.g. Steering
calibration, then the user will be prompted to perform this process. Once each step has been completed, the screen will display “Done”
and move an to the next step.
See section “Sports Mode: Start up Connection & Calibration” on page 39
If a core is not connected, the system will time-out and enter the Sports Mode application.
The display will also show RF signal strength, RX / TX status as well as confirmation of attached modules: Core (Co), Tower (To), Hub-Box
(Hb). When a module is attached the relevant initials will turn from grey to green.
»
HOME SCREEN (SPORTS MODE)
When calibrated, the screen will switch to the application Home Screen. This screen is the normal operating status display for the AGITO
system, it is divided in to three distinct zones to help the operator quickly navigate information when in use, this screen will also display
system warnings. When using Tower, a position bar will be displayed on the right hand side of the screen.
RF Signal Strength
Data TX / RX status
Connected Module Status:
Core (Co) Tower (To) Hub-Box (Hb)
System Status window:
User Profile & Switch Function
Throttle Mode
Mode Status window:
Wheel Type and Steering Mode
Steer Limit
Mode Status window:
(Tower Position - if connected)
Steer Rate
Mode Status window:
Speed limit
Acceleration limit
Mode Status window:
Motor Speed feedback
Deceleration limit
System Status window:
Battery Voltage feedback
Motor mode
