AGITO
AGITO User Manual OS 5.0 Nova
36 - Setting up
»
MITCHELL MOUNT
Attach the two side plates to the Core
Inset and tighten the four 3/8th inch bolts
Place the Mitchell Mount on to the side plates
Inset and tighten the four bolts
»
STACKING RISERS
Join the two sides of the Stacking Riser together with a pair of Crossbars
Now attach to the Core with four 3/8th inch bolts and place either the V-Con PRO, Mitchell
Mount or another set of Risers to the top mounting points with four 3/8th inch bolts
ALWAYS ENSURE THE PAYLOAD IS PROPERLY AND SECURELY FIXED TO THE
AGITO CORE, USE A MINIMUM OF FOUR FIXTURE POINTS
»
TOWER: INSERTING GAS-STRUTS
Remove AGITO Tower from Case.
Attach battery and carefully invert the Tower (Red light indicates power).
Remove the dust cover and insert your chosen Gas-Strut, see Chart below.
Using the manual adjustment buttons, carefully fully extend the tower.
Ensure that the Gas-Strut remains aligned
