Motion Impossible AGITO, User Manual

Page: 32 / 85

AGITO
www.Motion-Impossible.com 27 - Operating System AGITO User Manual OS 5.0 Nova
» REPEATABLE MOVES
»
CONNECT / CALIBRATION SCREEN (REPEATABLE MOVES)
Repeatable Moves is a hybrid mode that provides basic record and playback of AGITO movement. It is recommended that initial setup
is done within either Sports or Trax mode dependant upon the drive-ends in use. Once configured / calibrated, the user can then access
Repeatable Moves.
If a core is not connected, the system will time-out and enter the Repeatable Moves Mode application.
The display will also show RF signal strength, RX / TX status as well as confirmation of attached modules: Core (Co), Tower (To), Hub-Box
(Hb). When a module is attached the relevant initials will turn from grey to green.
» HOME SCREENS (REPEATABLE MOVES MODE)
RECORDING SCREEN
When calibrated, and a clip has been created the screen will switch to the application Home Screen. This screen is the normal standby
and recording display for the AGITO system, it is divided in to three distinct zones to help the operator quickly navigate information when
in use, this screen will also display system warnings as it does in Sports and Trax modes.
RF Signal Strength
Data TX / RX status
Connected Module Status:
Core (Co) Tower (To) Hub-Box (Hb)
System Status window:
Current Clip Name
Mode Status
Mode Status window:
Wheel Type and Steering Mode
Steer Limit
Mode Status window:
(Tower Position - if connected)
Steer Rate
Mode Status window:
Speed limit
Acceleration limit
Mode Status window:
Motor Speed feedback
Deceleration limit
System Status window:
Battery Voltage feedback
Clip Length feedback
RF Signal Strength
Data TX / RX status
Connected Module Status:
Core (Co) Tower (To) Hub-Box (Hb)
System Status window:
Current Clip Name
Playback Timeline and Mode Status
Mode Status window:
Wheel Type and Steering Mode
Steer Limit
Mode Status window:
(Tower Position - if connected)
Steer Rate
Mode Status window:
Speed limit
Acceleration limit
Mode Status window:
Motor Speed feedback
Deceleration limit
System Status window:
Battery Voltage feedback
Remaining Clip Length feedback
PLAYBACK SCREEN
Once a recording has been created, or when a previous clip is loaded, the Playback Screen will be displayed.