![background image](http://html1.mh-extra.com/html/mortara/eli-380/eli-380_user-manual_1836776084.webp)
CONFIGURATION SETTINGS
Ethernet Transmission Status Indicator LEDs
The operator can monitor LAN interface connection and data transmission by observing the LEDs (Light Emitting
Diodes) located at the system’s external connector. The LEDs can be viewed from the outside (rear) of the ELI 380.
LED LOCATION
STATUS
INDICATES
Left LED
Dark
ELI 380 is in the Off state.
Left LED
Illuminated
Network link is detected; ELI 380 is On or in Stand-by.
Right LED
Flashing
When transmit or receive network traffic is detected.
NOTE:
The ELI 380 LAN is compatible with 10 and 100 MBPS networks.
DHCP
: Allows IT personnel to define whether the Dynamic Host Communication Protocol (DHCP) will be used to
obtain an IP address.
If DHCP is YES, the network will automatically and dynamically assign an IP address.
If DHCP is NO, the IT professional must enter the IP address, def gateway, and subnet mask.
IP Address:
Allows IT personnel to enter the fixed IP address for network transmission (if DHCP is not selected).
Def. Gateway:
Allows IT personnel to enter the address of the default gateway (if DHCP is not selected).
Subnet Mask:
Allows IT personnel to enter the sub net address (if DHCP is not selected).
Sync IP:
Allows IT personnel to enter the IP address of the host server. The host server refers to the IP where ELI
Link is installed.
NOTE:
Addresses are always entered as 4 sets of 3 digits; therefore, an address of 192.168.0.7 must be
entered as 192.168.000.007.
Port Number:
Allows IT personnel to enter the port number used by the host server. The port number setting
must match the ELI Link.
LAN Option:
Allows IT personnel to enter the LAN option code; valid range is 0 to 10.
Select
Done
to save changes and exit the menu, or
Cancel
to exit without saving.
Configuration Menu: Wireless Local Area Network (WLAN) Connection
and Setup
The facility Information Technology (IT) professional must:
Configure the wireless access point(s).
Configure the compatible electronic information management system.
Provide the ELI 380 WLAN configuration values.
To set up the ELI 380 for WLAN transmission:
1.
Select
from the real-time display, followed by
Advanced
and enter the password.
2.
Select
WLAN.
3.
Configure the ELI 380 for Dynamic Host Communication Protocol (DHCP) or static IP. Wireless security
encryption options are selected from a list and include:
72