![background image](http://html1.mh-extra.com/html/mortara/eli-380/eli-380_user-manual_1836776085.webp)
CONFIGURATION SETTINGS
None
WEP 128
WEP 64
WPA-PSK
WPA–LEAP
WPA2-PSK
WPA2-PEAP
WPA2-EAP-TLS
NOTE:
Environmental conditions may affect the reliability of WLAN transmissions.
If DHCP is set to NO, your wireless access point will have a static network setting and the following parameters
must be configured in the device:
IP Address
Default Gateway
Sub Net Mask
If DHCP is set to YES, your wireless access point will have an automatic network setting and IP address. The
default gateway and sub net mask do not need to be configured.
In either DHCP setting, the following wireless network parameters must be provided by the IT professional:
Host IP
Port Number
SSID
Channel Number
Password or passphrase
NOTE:
Addresses are always entered as 4 sets of 3 digits; therefore, an address of 192.168.0.7 must be
entered on the ELI 380 as 192.168.000.007.
If WEP wireless security is disabled on your access point, then set security (WEP) to
None
.
If WEP wireless security is enabled on your access point, the following wireless network parameters must be
configured in the device by the IT professional:
Security:
WEP
WEP Key
WEP Key ID
NOTE:
The range for the WEP key is 1-4. If the range on your access point is 0-3, then 1 at the ELI 380
maps to 0 on the access point; 2 maps to 1 on the access point, etc.
If your wireless security environment is WPA or WPA2 (Wi-Fi Protected Access) then enter the following:
Security:
WPA-PSK or WPA2-PSK
Passphrase:
NOTE:
The passphrase length is limited to 64 digital Hex Value characters or 63 ASCII characters.
If your wireless security environment is LEAP or PEAP then enter the following:
Security:
WPA-LEAP or WPA2-PEAP
LEAP or PEAP User Name
LEAP or PEAP Password
NOTE:
LEAP user name and password are limited to 63 characters.
73