Mono Fusion Compact PRO Operating And Maintenance Manual Download Page 33

Page: 33 / 106

Fusion Compact Pro Bread Plant, Rev. A21 14-04-21

ROUNDER CLEANING INSTRUCTIONS

SWITCH OFF AND ISOLATE MACHINE FROM MAINS

NOTE:

SWITCH OFF AND ISOLATE FROM THE MAINS SUPPLY BEFORE
COMMENCING ANY CLEANING.

MENCING CLEANING

DAILY:

All dough touching surfaces should be cleaned every day.
Don’t use steel scrapers and poisonous chemicals or soap for cleaning purposes.

WEEKLY:

Outer sides should be cleaned by a wet cloth.
Scrape and scrub wheels clean as needed.

DANGER:

Cleaning operations should only be carried out with the machine switched off

and disconnected from the electric power supplies.

BEWARE:

Don’t use jets of water to clean the control panels and the electric control box.
Don’t use solvents, which could damage the paint and synthetic materials.

ROUNDER CLEANING

Summary of Contents for Fusion Compact PRO











































































































Search results

Summary of Contents for Fusion Compact PRO

Reviews:

Related manuals for Fusion Compact PRO

Brands by name

Popular brands

Mono Fusion Compact PRO, Operating And Maintenance Manual

Search results

Summary of Contents for Fusion Compact PRO

Reviews:

Related manuals for Fusion Compact PRO

Brands by name

Popular brands