Mono Fusion Compact PRO Operating And Maintenance Manual Download Page 2

Page: 2 / 106

Fusion Compact Pro Bread Plant, Rev. A21 14-04-21

SAFETY SYMBOLS

The following safety symbols are used throughout this product documentation and manual
(available at

www.monoequip.com

Before using your new equipment, read the instruction manual carefully and pay special
attention to information marked with the following symbols.

DO NOT TRY TO DISABLE ANY SAFETY DEVICES.
THEY ARE FITTED FOR YOUR SAFETY.

Indicates a hazardous situation which, if not avoided,
will result in death or serious injury.

Indicates a hazardous situation which, if not avoided,
will result in electric shock.

Indicates a hazardous situation which, if not avoided,
will result in minor or moderate injury.

WARNING

CAUTION

NOTE: DIVIDER OIL

DO NOT USE ORDINARY VEGETABLE OIL

FROM SHOP SHELVES

IN THE DIVIDER

THIS WILL FORM A GUM-LIKE RESIDUE,

CAUSING STICKING AND POSSIBLE DAMAGE

TO THE MACHINE.

MONO RECOMMENDS THE USE OF

“CRODA SUPER WUNDROL”

(AVAILABLE FROM MONO.

PART NUMBER “A900-25-272

”)

IMPORTANT NOTES

Summary of Contents for Fusion Compact PRO











































































































Search results

Summary of Contents for Fusion Compact PRO

Reviews:

Related manuals for Fusion Compact PRO

Brands by name

Popular brands

Mono Fusion Compact PRO, Operating And Maintenance Manual

Search results

Summary of Contents for Fusion Compact PRO

Reviews:

Related manuals for Fusion Compact PRO

Brands by name

Popular brands