Mono Fusion Compact PRO, Operating And Maintenance Manual

Page: 34 / 106

Fusion Compact Pro Bread Plant, Rev. A21 14-04-21
32
8.0 OPERATION of the bread plant
1. START/STOP : Start/Stop button
If the led light is on, the machine is in manual operation mode .
Press 2 to put machine into automatic mode (no light) if required.
MANUAL (Led is on) : This allows unloading the dough pieces after the divider has
finished loading the prover.
In this mode it is possible to control the speed to match the moulders speed. By using button 9, speed
adjustment is possible. Set at minimum there is no stop duration, machine operates continuously.
AUTO (Led is off): Starts the prover in auto mode.
(No movement will happen until dough passes the sensor on the chute.)
2. Manual mode / Auto mode selection
3. UV Controls the ultraviolet light.(if fitted)
4. RESET : When pressed resets the display(8)
5. Steam (if fitted)
6. P: Extra option button (not used)
7. Heat (if fitted)
8. Digital display
9. Speed control
10. Lamp (if fitted)
Dough pieces are transferred from a divider via a chute to a carrier pocket in the prover.
In auto mode the dough travels down the chute and into the pocket, an electronic eye is
triggered which causes the carriers to move one position ready for the next dough piece.
OPERATION OF THE PROVER
5
2
1
6
EMERGENCY
STOP
8
4
9
3
10
7
A