Mono Fusion Compact PRO Operating And Maintenance Manual Download Page 19

Page: 19 / 106

Fusion Compact Pro Bread Plant, Rev. A21 14-04-21



Check the machine after installation to ensure the belt moves in the correct direction

indicated (see arrow in photo below).

(If wrong - swap positions of any two of the three phase carrying wires in the plug.

This should be factory set and not need to be done)



Fill oil tank to 2/3 level, with your company recommended food safe oil.

WARNING!

DO NOT USE ORDINARY VEGETABLE OIL FROM SHOP SHELVES

IN THE DIVIDER

THIS WILL FORM A GUM-LIKE RESIDUE, CAUSING STICKING AND POSSIBLE
DAMAGE TO THE MACHINE.

MONO RECOMMENDS THE USE OF

“CRODA SUPER WUNDROL”

(AVAILABLE FROM MONO.

PART NUMBER “A900-25-272

”)

DIVIDER INSTALLATION

OPEN DOOR

FILL LEVEL

OPEN OILBOX LID AND POUR IN OIL

Summary of Contents for Fusion Compact PRO











































































































Search results

Summary of Contents for Fusion Compact PRO

Reviews:

Related manuals for Fusion Compact PRO

Brands by name

Popular brands

Mono Fusion Compact PRO, Operating And Maintenance Manual

Search results

Summary of Contents for Fusion Compact PRO

Reviews:

Related manuals for Fusion Compact PRO

Brands by name

Popular brands