Mono Fusion Compact PRO Operating And Maintenance Manual Download Page 53

Page: 53 / 106

Fusion Compact Pro Bread Plant, Rev. A21 14-04-21

8.0 OPERATING

Check intermediate prover is switched on.

Press

START BUTTON (1)

on prover control panel.

Ensure the led on the button is not illuminated.(if it is, press 2)
This starts the prover in auto mode.

(No movement will happen until dough passes the sensor on the chute.)

Check that the hopper is clear of objects and Smear interior with divider oil.

WARNING!

DO NOT USE ORDINARY VEGETABLE OIL FROM SHOP SHELVES, IN THE DIVIDER

THIS WILL FORM A GUM-LIKE RESIDUE,

CAUSING STICKING AND POSSIBLE DAMAGE TO THE MACHINE.

MONO RECOMMENDS THE USE OF

“CRODA SUPER WUNDROL”

(AVAILABLE FROM MONO.

PART NUMBER “A900-25-272

”)

CONTROL POD BUTTONS

DISPLAY

ADJUST

DOWN

OPTION

NOT USED

STOP

START

EMERGENCY

STOP

STOP CIRCUIT

RESET BUTTON

ADJUST

WEIGHT

ADJUST

SPEED

DOUGH

COUNTER

PROVER PANEL

Summary of Contents for Fusion Compact PRO











































































































Search results

Summary of Contents for Fusion Compact PRO

Reviews:

Related manuals for Fusion Compact PRO

Brands by name

Popular brands

Mono Fusion Compact PRO, Operating And Maintenance Manual

Search results

Summary of Contents for Fusion Compact PRO

Reviews:

Related manuals for Fusion Compact PRO

Brands by name

Popular brands