Mono Fusion Compact PRO Operating And Maintenance Manual Download Page 18

Page: 18 / 106

Fusion Compact Pro Bread Plant, Rev. A21 14-04-21

Notes on Divider installation

DO NOT ATTEMPT TO LIFT THE DIVIDER
BY HUMAN FORCE (LIFTING)



Use of a

forklift or crane

is recommended for lifting or the machine can be pushed on

the castors provided (beware of unlevel ground).



To lift with a forklift

- the machine must be secured to a pallet.



To lift with a crane

- lifting eyes are provided.

Check that the power rating on the serial number plate matches

the supply that the machine is to be connected to.



The Dough Divider should be connected to a power socket on the prover.

DIVIDER INSTALLATION

LIFTING EYES

POWER SOCKETS

Summary of Contents for Fusion Compact PRO











































































































Search results

Summary of Contents for Fusion Compact PRO

Reviews:

Related manuals for Fusion Compact PRO

Brands by name

Popular brands

Mono Fusion Compact PRO, Operating And Maintenance Manual

Search results

Summary of Contents for Fusion Compact PRO

Reviews:

Related manuals for Fusion Compact PRO

Brands by name

Popular brands