Mono Fusion Compact PRO Operating And Maintenance Manual Download Page 30

Page: 30 / 106

Fusion Compact Pro Bread Plant, Rev. A21 14-04-21

MOULDER CLEANING INSTRUCTIONS

NOTE:

SWITCH OFF AND ISOLATE FROM THE MAINS SUPPLY BEFORE
COMMENCING ANY CLEANING.

SWITCH OFF AND ISOLATE MACHINE FROM MAINS

SUPPLY BEFORE COMMENCING CLEA

DAILY CLEANING

(DO NOT USE A PRESSURE WASHER)

Pull machine away from the prover.

Scrape off any dough residue.

Raise front-hinged cover (

Lift out curling chain (

) and shake off any dough residue, then brush with a

stiff nylon brush. ***

DO NOT WASH

***

Replace

chain.

Unclip and wipe clean the scrapers (see photo above).

***

DO NOT WASH

***

Smear edges with vegetable oil.

Scrape rollers with a

plastic

scraper and remove any debris from the roller

edges.

10.

Replace scrapers and close front cover.

MOULDER CLEANING

UNCLIP SCRAPERS FOR CLEANING

Summary of Contents for Fusion Compact PRO











































































































Search results

Summary of Contents for Fusion Compact PRO

Reviews:

Related manuals for Fusion Compact PRO

Brands by name

Popular brands

Mono Fusion Compact PRO, Operating And Maintenance Manual

Search results

Summary of Contents for Fusion Compact PRO

Reviews:

Related manuals for Fusion Compact PRO

Brands by name

Popular brands