Mono Fusion Compact PRO, Operating And Maintenance Manual

Page: 58 / 106

Fusion Compact Pro Bread Plant, Rev. A21 14-04-21
56
10.0 TROUBLESHOOTING
Divider does not run
 Check power is turned on at the isolator on the prover.
Check that the plant is connected and turned on.
Check plug into intermediate prover is correctly connected.
 Check all safety switches are operating (hopper closed etc.).
 Check a red “stop button” is not depressed (Turn to release.) and that stop
circuit reset button (8) has been pressed.
WARNING:
IF THERE IS ANY POSSIBILITY OF DAMAGE TO PLUGS OR LEADS,
ISOLATE DIVIDER FROM PROVER BEFORE CHECKING.
If divider still does not function after carrying out these checks,
call out “Mono” service dept.