Monaco DYNASTY 2006, User Manual

Page: 266 / 384

266 • SECTION 8 — ELECTRICAL SYSTEMS - HOUSE DYNASTY 2006
Inverter three-stage charging cycle:
• Bulk Charge Cycle:
Brings the DC voltage up high, initially
between 14.2 - 14.6 Volts. The length of time
the inverter is in Bulk Charge depends the state
of charge of the batteries.
• Absorb Cycle:
Absorb Cycle battery voltage is the same as the
Bulk Charge Cycle, between 14.2 - 14.6 Volts.
Length of the Absorb Cycle is a timed event
determined by the inverter.
• Float Charge Cycle:
Charge voltage is generally around 13.3 - 13.7
Volts. Approximately 80% of the charging cycle
has been completed by this time.
NOTE:
Refer to the OEM manual located in
the Owner’s Information File Box for
detailed instructions.
Auto Generator Start
The Auto Gen Start (AGS) allows the inverter remote control to start the generator when battery voltage or
interior motorhome temperature reaches a preset point.
NOTE:
Generator run time, battery voltage and interior temperature settings for the AGS function
are selected with the AGS controller, located in a cargo bay next to the inverter. Refer to the
OEM manual located in the Owner’s Information File Box for detailed instructions.
To Enable AGS:
• Press the
AGS
button on the inverter remote control. Use
the select knob to scroll through the AGS menu options
until “
AutoGenSt Enabl
” appears. Press the select knob to
activate the AGS.
To Disable AGS:
• Press the
AGS
button on the inverter remote control. Use
the select knob to scroll through the AGS menu options
until “
AutoGenSt OFF
” appears. Press the select knob to
deactivate the AGS.
Hose = Inverter in Charge Mode
Bucket = Battery
06023b
AGS Controller
060299