Monaco DYNASTY 2006, User Manual

Page: 212 / 384

212 • SECTION 6 — WATER SYSTEMS DYNASTY 2006
Inside the motorhome:
Access the Main Menu, and move the joystick until the cursor is next to Coach Tank/Misc Status. Move the
joystick right to display tank status.
The Coach Tank/Misc Status screen displays:
• Fresh, grey and black tank percentage full and corresponding
gallons.
• LP-Gas tank percentage of full.
• Basement and outside temperatures.
• Compass heading.
System Options:
From the
Main Menu
, scroll down to the
Systems Options
screen.
Move the joystick to the right to enter.
Systems Options screen displays:
• Screen Color • Text Color • Compass Calibration
• Sensor Mode • System Setup
System Setup:
Should only be used by a technician initializing or troubleshooting
the system. Requires access code
1218
.
NOTE:
Only service personnel should enter the access code.
Move the joystick to the right to enter Set Tank Capacities . Move
the joystick Up or Down to select the tank. Move the joystick right to
enter. Move the joystick Up or Down to change the Hundreds value.
Move the joystick right from the hundreds digit to set.
Set Tank Capacities Screen:
The purpose of setting tank capacities is to program the Aladdin™
system fuel and holding tank capacities in gallons. The Aladdin system
uses the fuel tank capacity information to estimate fuel remaining
calculations.
Aladdin Joystick
080377d
Power LED
MAIN MENU
ENGINE/TRANS STATUS
COACH ELECTRICAL STATUS
COACH TANK/MISC STATUS
TRIP METER SELECTION
TIME/ALARM FUNCTIONS
CAMERA SELECT
> SYSTEM OPTIONS
POWER DOWN ALADDIN
SET TANK CAPACITIES
FUEL TANK = 150 GAL
FRESH TANK = 100 GAL
GRAY TANK = 56 GAL
BLACK TANK = 56 GAL
LP TANK = 38 GAL
COACH TANK/MISC STATUS
PCT GAL
FRESH TANK XXXX XXXXX
GRAY TANK XXXX XXXXX
BLACK TANK XXXX XXXXX
LP TANK XXXX XXXXX
BASEMENT TEMP XXXX F
OUTSIDE TEMP XXXX F
COMP HEADING XX XXX
SYSTEM OPTIONS
ALADDIN MODEL 440-06C V3.03
JOYSTICK FIRMWARE V
SCREEN COLOR: 01
TEXT COLOR: 16
SENSOR MODE: NORMAL
> SYSTEM SETUP
COMPASS
CALIBRATION
SYSTEM SETUP
> SET TANK CAPACITIES
TANK
CALIBRATION
ELECTRICAL CALIBRATION
SYSTEM SETUP MAINT CODE
ENTER CODE:
0000