Monaco DYNASTY 2006, User Manual

Page: 107 / 384

DYNASTY 2006 EXTERIOR & INTERIOR CARE — SECTION 3 • 107
Other Important Tips:
Avoid using strong chemicals on the Solid Surface such as paint removers or oven cleaners. If these chemicals
come in contact with the Solid Surface, quickly wash with water. Avoid contact with nail polish or nail polish
remover. If contact is made, quickly wash with water.
NOTE:
Do not cut directly on the solid surface. When pouring boiling water into the Solid Surface
sink, run cold water to prevent damage.
STAINLESS STEEL SURFACES
Clean stainless steel once a week with a damp sponge. Apply stainless steel cleaner/polish with the grain,
not across, using a non-abrasive cloth or sponge. Do not use steel wool, a wire brush or abrasive sponge pad as
these will mar the fi nish. Cleaner containing chloride is not recommended; however, if used, thoroughly rinse the
surface to prevent corrosion. To avoid water spots, do not allow water to evaporate on the surface.
WINDOWS
Water Spots:
Glass will develop water spots if not properly cleaned. Water spots are magnifi ed when the glass has a
refl ective fi nish. Use a squeegee immediately after washing to reduce water spotting. To remove stubborn water
stains from refl ective glass we recommend Cerium Oxide Polishing Compound, made by C.R. Lawrence,
available at most glass shops.
Condensation
Condensation occurs from water vapor present in the air. More vapor is added by breathing, bathing, cooking,
etc. and collects wherever there is available air space. When the temperature reaches the dew point, the water
vapor in the air condenses and changes to liquid form.